Magnum V8-5.7L VIN H (2005)
9. Slide the collar (3) on the Bearing Remover 9082 (1) downward over the fingers (3) of the tool.
CAUTION: Verify that the geartrain end-play shim has remained on the output shaft and against the park gear. The shim may be adhered to the
bearing inner race. Retrieve the shim from the bearing and install over the output shaft and against the park gear.
10. Remove the output shaft bearing (3).
INSTALLATION
CAUTION: Verify that the geartrain end-play shim is properly installed over the output shaft and against the park gear.
