Magnum SRT-8 V8-6.1L VIN 3 (2006)
Antenna Control Module: Service and Repair
Wagon
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate trim.
3. Disconnect wire harness connectors and antenna cable.
4. Remove mounting fasteners and antenna module.
INSTALLATION
1. Position module into place.
2. Install and tighten mounting fasteners.
3. Connect wire harness connectors and antenna cable to antenna module.
4. Install the liftgate trim.
5. Connect the battery negative cable.
