Magnum SRT-8 V8-6.1L VIN 3 (2006)
7. Pull the latch (1) away from the front of the crossmember far enough to access and disengage the hood latch release cable housing from the latch
and the cable ball end (2) from the latch lever.
8. Remove the hood latch from the vehicle.
INSTALLATION
1. Position the hood latch (1) close enough to the front of the headlamp mounting crossmember to access and engage the hood latch release cable ball
end (2) to the latch lever and the cable housing to the latch.
2. Position the latch (2) to the front of the crossmember (1).
3. Install and tighten the two screws (3) that secure the latch to the crossmember. Tighten the screws to 28 N.m (21 ft.lbs.).
4. Adjust the latch position as necessary to achieve proper hood latch operation.
5. Position the right underhood appearance cover (2) to the headlamp mounting crossmember (1).
