Magnum SRT-8 V8-6.1L VIN 3 (2006)
27. Remove both front (3) and both rear (2) mounting bolts fastening crossmember (1) in place.
28. Slowly lower crossmember using jack until crossmember is at a comfortable working level to access link and stabilizer bar fasteners.
29. On each end, remove bolt (3) and nut fastening stabilizer bar (4) to stabilizer link (2).
30. Remove bolts (1) fastening each stabilizer bar cushion retainer to crossmember.
31. Remove stabilizer bar (4) with cushions and retainers.
32. Remove coil springs and isolators (1, 2 and 5) from spring links.
