Magnum SRT-8 V8-6.1L VIN 3 (2006)
6. Pull the trim panel (2) away from the inside of the door far enough to disengage the locator pins near the top of the panel from the door, then lift
the rear of the panel upward far enough to disengage the interior door latch lock link and knob (1) from the clearance hole at the upper rear corner
of the panel.
7. Reach between the top of the trim panel (3) and the inside of the door shell to unsnap the plastic clip that secures the end of the interior door
handle latch release link (1) to the handle lever (2) and disengage the link from the handle.
8. Pull the trim panel (1) away from the inside of the door shell far enough to access and disconnect the door wire harness (4) connectors from the
power window/lock/mirror switches (2), the door module (6), and the door courtesy lamp (5) as the vehicle is equipped.
9. Disengage the retainers (3) that secure the door wire harness to the inside of the trim panel.
10. Remove the trim panel from the inside of the door.
