Magnum SRT-8 V8-6.1L VIN 3 (2006)
Power Mirror Switch: Service and Repair
SWITCH-MIRROR
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel.
3. Remove the power mirror switch from the door trim panel by twisting the switch counter-clockwise.
INSTALLATION
1. Install power mirror switch to door trim panel.
2. Connect wire harness connectors to switches.
3. Install door trim panel.
4. Connect battery negative cable.
