Magnum SRT-8 V8-6.1L VIN 3 (2006)
Radiator Support: Service and Repair
CROSSMEMBER-HEADLAMP MOUNTING
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the front fascia Refer to Front Bumper.
3. Remove the headlamp units (1).
4. Disconnect the headlamp wire harness from the horns.
5. Remove the bolts that secure the horns to the headlamp mounting crossmember and remove the horns.
6. Mark the location of the hood latch (2) on the front of the headlamp mounting crossmember (1) to aid in reinstallation.
7. Remove the two bolts (3) that secure the hood latch to the headlamp mounting crossmember and position the hood latch and cable out of the way.