Magnum SRT-8 V8-6.1L VIN 3 (2006)
Spoiler: All Technical Service Bulletins
Body - Liftgate Spoiler Seal is Loose
NUMBER: 23-042-05
GROUP: Body
DATE: September 9, 2005
THIS BULLETIN IS BEING PROVIDED IN ADVANCE. DO NOT ORDER PARTS OR PERFORM ANY ACTIONS RELATED TO THIS
BULLETIN UNTIL OCTOBER 17, 2005.
SUBJECT:
Liftgate Spoiler Outer Seal Delamination
OVERVIEW:
This bulletin involves removing the old seal and installing revised seals.
MODELS:
2005-2006
(LX)Magnum
SYMPTOM/CONDITION:
The surround seal on the liftgate spoiler is loose and over flush to the body and spoiler.
DIAGNOSIS:
Visually inspect the liftgate spoiler seal for adhesion to the spoiler, if the seal is loose perform the Repair Procedure.
PARTS REQUIRED:
REPAIR PROCEDURE:
1.
Use the procedures outlined on TechCONNECT 23-Body/Exterior/Spoiler to remove the liftgate spoiler from the vehicle.
2.
Set spoiler upside down on a surface that will not scratch or mar the painted surface.
