Magnum SRT-8 V8-6.1L VIN 3 (2006)
16. Remove camshaft tensioner/thrust plate assembly.
NOTE: Identify lifters; to ensure installation in original location.
17. Remove the tappets (2) and retainer (1) assembly.
18. Install a long bolt into front of camshaft to aid in removal of the camshaft. Remove camshaft, being careful not to damage cam bearings with the
cam lobes.
INSPECTION
1. The cam bearings are not serviceable. Do not attempt to replace cam bearings for any reason.
INSTALLATION - CAMSHAFT CORE HOLE PLUG
1. Clean core hole in block.
NOTE: Do not apply adhesive to the new core hole plug. A new plug will have adhesive pre-applied.
2. Install a new core hole plug at the rear of camshaft, using suitable flat faced tool. The plug must be fully seated on the cylinder block shoulder.
INSTALLATION - CAMSHAFT