Magnum SRT-8 V8-6.1L VIN 3 (2006)
6. -
Step 1 - 27 Nm (20 ft. lbs.) torque.
7. -
Step 2 - Turn main cap bolts an additional 90°.
8. Install the crossbolts with new washer/gasket. Starting with crossbolt A torque each crossbolt to 28 Nm (21 ft. lbs.) torque.
9. Repeat crossbolt torque procedure.
10. Measure crankshaft end play.
11. Position the connecting rods onto the crankshaft and install the rod bearing caps.