Magnum SRT-8 V8-6.1L VIN 3 (2006)
1. Position intake manifold.
2. Install intake manifold retaining bolts, and tighten in sequence from the middle bolts towards the outside in a crisscross pattern. Torque fasteners
to 12 Nm (106 inch lbs.).
3. Connect electrical connectors for the following components:
-
Manifold Absolute Pressure (MAP) Sensor
-
Fuel Injectors
-
ETC (Electronic Throttle Control)
4. Connect Brake booster hose, purge hose, and MUA hose (Make Up Air hose).
5. Install air inlet hose.
6. Connect negative cable to battery
7. Install engine covers (1).