Magnum SRT-8 V8-6.1L VIN 3 (2006)
3. Install cover and new gasket. Tighten fasteners to 28 Nm (250 inch lbs.).
NOTE: The large lifting stud is torqued to 55 Nm (40 ft. lbs.).
4. Install the oil pan and pick up tube.
5. Install the A/C compressor.
6. Install the generator.
7. Install power steering pump.
8. Install the dipstick support bolt.
9. Install the thermostat housing.
10. Install crankshaft damper.
11. Install accessory drive belt tensioner assembly and both idler pulleys.
12. Install radiator lower hose.
13. Install both heater hoses.
14. Install radiator fan shroud.
15. Install the fan and fan drive assembly
16. Install the accessory drive belt.
17. Install the coolant bottle and washer bottle.
18. Install the upper radiator hose.
19. Install the air cleaner assembly.
20. Fill cooling system.
21. Refill engine oil.
22. Connect the battery negative cable.
23. Install the engine cover (1).
