Magnum SRT-8 V8-6.1L VIN 3 (2006)
6. Disconnect the passenger side front intermediate floor distribution duct from the passenger side rear intermediate floor distribution duct (3).
7. Remove the passenger side rear intermediate floor distribution duct from the floor support.
8. Remove the push pin fastener (6) that secures the driver side rear intermediate floor distribution duct (5) to the floor support.
9. Disconnect the driver side front intermediate floor distribution duct (7) from the front floor distribution duct.
10. Disconnect the driver side front intermediate floor distribution duct from the driver side rear intermediate floor distribution duct.
11. Remove the driver side rear intermediate floor distribution duct from the floor support.
INSTALLATION
1. Install the driver side rear intermediate floor distribution duct (5) and the passenger side rear intermediate floor distribution duct (3) into the slots
in the floor support (4).
2. Connect the driver side front intermediate floor distribution duct (7) to the driver side rear intermediate floor distribution duct.
3. Connect the driver side front intermediate floor distribution duct to the front floor distribution duct (8).
4. Install the push-pin fastener (6) that secures the driver side rear intermediate floor distribution duct to the floor support.
5. Connect the passenger side front intermediate floor distribution duct (2) to the passenger side rear intermediate floor distribution duct.
6. Connect the passenger side front intermediate floor distribution duct to the front floor distribution duct.
7. Install the push-pin fastener (1) that secures the passenger side front intermediate floor distribution duct to the floor support.
8. Install the carpet onto the front floor panel and under the instrument panel.
9. Install the front seats.
10. Install the center floor console.
