Magnum SRT-8 V8-6.1L VIN 3 (2006)
1. Position the air outlet (1) into it's location on the outboard passenger side of the instrument panel (2).
NOTE: Make sure that the air outlet is properly aligned to the duct within the instrument panel opening and that the foam seal on the outlet is
properly installed.
2. Align the air outlet foam seal (3) with the duct in the instrument panel (4) and gently push on the air outlet until the snap clip retainers on the outlet
are fully engaged to the instrument panel.
AIR OUTLET BARRELS - DODGE
REMOVAL
NOTE:
-
The instrument panel air outlet barrels are retained to the pivots within the air outlets by a snap fit.
-
LHD model shown. RHD model similar.
1. Using a trim stick or another suitable wide flatbladed tool (1), gently pry the air outlet barrel(s) (2) out of the instrument panel air outlet(s) (3) as
required.
INSTALLATION
NOTE: LHD model shown in illustration. RHD model similar.
