Magnum SRT-8 V8-6.1L VIN 3 (2006)
1. If removed, install the foam seal (2) over the tapping block of the A/C evaporator (1). If the seal is deformed or damaged, it must be replaced.
2. Install the A/C evaporator into the lower half of the HVAC housing (3). Make sure that the evaporator drain within the HVAC housing is clean
and unrestricted and the the insulator around the A/C evaporator is properly installed.
3. Assemble the HVAC housing. See: Housing Assembly HVAC/Service and Repair/Overhaul/HVAC Housing
4. Install the HVAC housing assembly. See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/HVAC Housing - Removal
and Installation
5. If the A/C evaporator is being replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system. When replacing multiple A/C
system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the rerfrigerant system. Use only
refrigerant oil of the type recommended for the A/C compressor in the vehicle.
