Magnum SRT-8 V8-6.1L VIN 3 (2006)
5. Remove the tape or plugs from the heater core tubes and heater core ports.
6. Lubricate new rubber O-ring seals with clean engine coolant and install them onto the heater core tube fittings. Use only the specified O-ring as
they are made of a special material for the engine cooling system.
7. Install the heater core tubes (2) onto the heater core (3).
8. Install the two retaining clamps (1) that secure the heater core tubes to the heater core. Make sure that the clamps are installed correctly and
securely.
9. Install the heater core tubes (4) and the flange (2) to the front of the HVAC housing (3).
10. Install the two screws (1) that secure the flange to the HVAC housing. Tighten the screws to 2.2 N.m (20 in. lbs.).