Magnum SRT-8 V8-6.1L VIN 3 (2006)
Housing Assembly HVAC: Overhaul
Air Distribution Housing
HOUSING-AIR DISTRIBUTION
DISASSEMBLY
1. Remove the air distribution housing (1) from the HVAC housing and place it on a workbench.
2. Remove the screws (2) that secure the mode door actuator (4) and the blend door actuator (7) to the driver side of the air distribution housing and
remove the actuators.
3. Remove the screws (5) that secure the blend door actuator mounting bracket (6) and the mode door actuator mounting bracket (3) to the driver side
of the air distribution housing and remove the mounting brackets.
4. Remove the instrument panel door linkage (3) from the pivot shaft located on the driver side of the air distribution housing (8) and carefully
disconnect the linkage rod (2) from the instrument panel door lever (1).
5. Remove the defrost/demister door linkage (7) from the pivot shaft on the air distribution housing and carefully disconnect the linkage rod (12)
from the defrost/demister door lever (11).
6. Remove the mode door cam (6) from the air distribution housing.
7. Remove the floor door linkage (5) from the floor door lever (4) and the air distribution housing.
8. Remove the blend door cam (9) from the blend door lever (10) and the air distribution housing.
