Magnum SRT-8 V8-6.1L VIN 3 (2006)
1.
Connect the CH9404 StarSCAN(R) vehicle cable to the StarSCAN(R) and the vehicle.
2.
Power ON the StarSCAN(R).
3.
Retrieve the old CCN part number. Using the StarSCAN(R) at the "Home" screen:
a.
Select "ECU View"
b.
Touch the screen to highlight the CCN in the list of modules.
c.
Record the "Part Number", displayed on the "ECU Overview" screen, for later reference.
4.
Insert the USB Key, into the USB port on the TechCONNECT or equivalent PC (Fig. 3).
5.
Insert the StarSCAN(R) Software Update CD into the TechCONNECT or equivalent PC. The StarSCAN(R) Software Update CD will start
automatically.
a.
Select "Controller Flash".
b.
Follow the on screen instructions.
6.
At the "Select the type of information you wish to enter." screen:
a.
If the old "Part Number" was recorded in Step # 3, proceed to Step # 7.
b.
If the old "Part Number" is not known, proceed to Step # 8.
7.
Select "Enter part number".
a.
Follow the on screen instructions. Enter the "Part Number" (use capital letters) recorded in Step # 3 when prompted to do so. Follow the on
screen instructions. Select "Next" after each step. Select "Finish" after completing the last step.
b.
Proceed to Step # 9.
8.
Select "Enter YME Information".
a.
Follow the on screen instructions. Select "Next" after each step. Select "Finish" after completing the last step.
