Magnum SRT-8 V8-6.1L VIN 3 (2006)
Air Filter Element: Service and Repair
AIR INTAKE SYSTEM
REMOVAL
Filter Element Only
Housing removal is not necessary for element (filter) replacement.
1. Loosen clamp and disconnect air duct at air cleaner cover (2).
2. Pry over 4 spring clips (5) from housing cover (3) (spring clips retain cover to housing).
3. Release housing cover (3) from locating tabs (4) on housing and remove cover (3).
4. Remove air cleaner element (filter) from housing.
5. Clean inside of housing before replacing element.
