Magnum SRT-8 V8-6.1L VIN 3 (2006)
5. 5.7L/6.1 L Engines - Remove hose clamp, then supply hose (3) from pump (1).
6. Remove hose clamp, then supply hose (3) at reservoir (2).
7. Remove supply hose from vehicle.
INSTALLATION
1. Install reservoir end of supply hose (3) on reservoir hose fitting. Install clamp securing hose in place.
2. 2.7L/3.5L Engines - Install supply hose (3) on pump. Install clamp (2) securing hose in place.
