dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Maintenance Required Lamp/Indicator > < Low Tire Pressure Indicator|Description and Operation
Page 2
background image

CAUTION!  The TPM system has been optimized for the original equipment tires and wheels. TPM system pressures have been established for the
tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the
same size, type, and/or style. After-market wheels can cause sensor damage. Do not use tire sealant from a can, or balance beads if your vehicle is
equipped with a TPM system, as damage to the sensors may result.

CAUTION!  After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the
valve stem, which could damage the wheel rim sensor.

NOTE:

-

The TPM system can inform the driver of a low tire pressure condition.

-

The TPM system is not intended to replace normal tire care and maintenance, nor to provide warning of a tire failure or condition.

-

The TPM system should not be used as a tire pressure gauge while adjusting your tire pressure.

GENERAL INFORMATION

This device complied with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to following conditions:
-

This device may not cause harmful interference.

-

This Device must accept any interference received including interference that may cause undesired operation.

Maintenance Required Lamp/Indicator > < Low Tire Pressure Indicator|Description and Operation