Magnum SRT-8 V8-6.1L VIN 3 (2006)
All switches, components, and modules are shown in the at rest position with the doors closed and the key removed from the ignition (Fig. 2).
Components are shown two ways. A solid line around a component indicates that the component is complete. A dashed line around the component
indicates that the component is being shown is not complete. Incomplete components have a reference number to indicate the sheet where the component
is shown complete. To find any diagram sheets referred to by number only, go to Vehicle/Diagrams/Electrical/Diagrams By Number.
It is important to realize that no attempt is made on the diagrams to represent components and wiring as they appear on the vehicle. For example, a short
piece of wire is treated the same as a long one. In addition, switches and other components are shown as simply as possible, with regard to function only.
The wiring diagrams are grouped into individual sets at the applicable system level. If a component is most likely found in a particular system, it will be
shown complete (all wires, connectors, and pins) within that system's diagrams. It can, however, be shown partially in another system's diagrams if it
contains some associated wiring.
SYMBOLS
