Magnum SRT-8 V8-6.1L VIN 3 (2006)
8.
Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label (Fig. 1).
REPAIR PROCEDURE - USING SOFTWARE UPDATE CD TO RETRIEVE THE FLASH FILE:
NOTE:
Before flashing this module, make sure the StarSCAN(R) is operating at 6.01 or later.
NOTE:
If this flash process is interrupted/aborted, the flash should be restarted.
NOTE:
For detailed information on the operation of the StarSCAN(R), refer to the Quick Reference documentation provided in the StarSCAN(R)
documentation kit. In addition, more recent information may also be available at the www.dcctools.com website. Look under "Training Aids"
and also under "Download Center> Frequently Asked Questions" for more help.
1.
Open the hood, look to see if there is a "Authorized Modification Label" p/n 04275086AB near the VECI label that indicates service bulletin
18-031-05 has been performed. If service bulletin 18-031-05 HAS NOT been performed continued to the next step. If service bulletin 18-031-05
has been performed no further action is required.
2.
Install a battery charger and verify that the charging rate provides approximately 13.5 volts.
3.
Connect the CH9404 StarSCAN(R) vehicle cable to the StarSCAN(R) and the vehicle.
4.
Power ON the StarSCAN(R).
5.
Retrieve the old ECU part number. Using the StarSCAN(R) at the "Home" screen:
a.
Select "ECU View"
b.
Touch the screen to highlight the appropriate ECU in the list of modules.
c.
Record the "Part Number", displayed on the "ECU Overview" screen, for later reference.
6.
Insert the StarSCAN(R) Software Update CD into the TechCONNECT or equivalent PC. The StarSCAN(R) Software Update CD will start
automatically.
a.
Select "Download Controller Flash".
b.
Follow the on screen instructions.
7.
At the "Select the method for looking up controller flash updates." screen:
a.
If the old "Part Number" was recorded in Step # 5, proceed to Step # 8.
b.
If the old "Part Number" is not known, proceed to Step # 9.
8.
Select "Enter part number".
