dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3135 > < Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3133

Magnum SRT-8 V8-6.1L VIN 3 (2006)

Page 7
background image

Valve Body Components

NOTE: The sleeves and pistons of the overlap regulating valves must not be mixed up.

2. Install all valves and springs from the valve body (1). Check all valves for ease of movement and shavings.
3. Install the screws to hold the side covers to the valve body. Tighten the screws to 4 Nm (35 inch lbs.).

Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3135 > < Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3133