dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Sunroof Glass Not Flush With Roof/Won't Close|Page 115 > < Body - Sunroof Glass Not Flush With Roof/Won't Close|Page 113
Page 1
background image

Sunroof / Moonroof Module: Service and Repair

REMOVAL

WARNING: The Excessive Force Limitation (EFL) feature must be calibrated any time a sunroof motor/module is replaced with a new component.
Failure to perform this procedure could result in vehicle damage and/or personal injury.

1. Move glass panel to the fully closed position.
2. Disconnect and isolate the bafferv ne~ative cable.
3. Remove headliner .
4. Disconnect the sunroof wire harness electrical connector.
5. Disconnect the four drain tubes (1) from sunroof housing.

Body - Sunroof Glass Not Flush With Roof/Won't Close|Page 115 > < Body - Sunroof Glass Not Flush With Roof/Won't Close|Page 113