Magnum SRT-8 V8-6.1L VIN 3 (2006)
Compressor Clutch Relay: Service and Repair
RELAY-A/C CLUTCH
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Open the cover of the integrated power module (IPM) (1) located in the engine compartment.
3. Remove the A/C clutch relay (2) from the IPM.
INSTALLATION
1. Position the A/C clutch relay (2) into the receptacle of the integrated power module (IPM) (1).
2. Align the A/C clutch relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals are fully
seated.
3. Close the cover of the IPM.
4. Reconnect the negative battery cable.
