Magnum SRT-8 V8-6.1L VIN 3 (2006)
Tire Pressure Module: Service and Repair
REMOVAL
FRONT
1. Remove wheelhouse splash shield at transponder requiring service.
2. Disconnect wiring harness connector (1) at transponder(2).
3. Remove mounting screws (3), then remove transponder (2) from front fascia (4).
2. Disconnect wiring harness connector (3) at transponder(2).
3. Remove mounting nuts (1), then remove transponder (2) from body seam flange (4).
REAR
1. Remove wheelhouse splash shield at transponder requiring service.
2. Disconnect wiring harness connector (3) at transponder (2).
3. Remove mounting nuts (1), then remove transponder (2) from body seam flange (4).
INSTALLATION
FRONT
