Magnum SRT-8 V8-6.1L VIN 3 (2006)
17. Remove bolt and nut fastening compression link (5) to knuckle (4).
18. Remove bolt fastening toe link (3) to knuckle (4).
19. Remove nut and bolt fastening stabilizer link to knuckle (4).
20. Remove nut and bolt fastening tension link (6) to knuckle (4).
21. Remove nut and bolt fastening camber link (1) to knuckle (4).
22. Remove knuckle (4).
23. Remove hub mounting bolts from knuckle.
KNUCKLE - SRT8
1. Raise and support vehicle.
2. Unclip wheel speed sensor cable at rear brake rotor shield (1).
3. Remove screw (2) fastening sensor head (3) to rear knuckle.
4. Remove wheel speed sensor head from knuckle.
5. Access and remove rear hub and bearing.
6. Remove parking brake shoes.
