Magnum SRT-8 V8-6.1L VIN 3 (2006)
CAUTION: When loosening jam nut and rotating inner tie rod, use care not to twist bellows at inner tie rod. Remove clamp at inner tie rod and
make sure bellows moves freely before rotating inner tie rod.
3. Loosen tie rod jam nut (3) at outer tie rod (5).
4. Remove outer tie rod end nut (1) at knuckle (2).
5. Using Remover (2), Special Tool 9630, separate outer tie rod end (1) from knuckle.
6. Unthread outer tie rod from inner tie rod. Count number of turns when removing outer tie rod. This will give a good starting point when
reassembling and when setting toe.
INSTALLATION
AWD
