Magnum SRT-8 V8-6.1L VIN 3 (2006)
Control Arm: Service and Repair
Front Suspension
Strut - Tension
STRUT - TENSION
REMOVAL
1. Raise and support vehicle.
2. Remove wheel mounting nuts (3).
3. Remove belly pan.
4. Loosen nut (3) attaching tension strut (2) ball joint stud to knuckle. Back nut off until nut is even with end of stud. Keeping nut on at this location
will help keep end of stud from distorting while using Puller in next step.