Magnum SRT-8 V8-6.1L VIN 3 (2006)
16. Install stabilizer bar heat shield (3) over stabilizer bar bushing retainer. Install mounting screws (1).
17. Install belly pan.
Arm - Upper Control
ARM - UPPER CONTROL
REMOVAL
1. If removing left upper control arm, remove and reposition coolant recovery container.
2. If removing right upper control arm, remove IPM from mount and reposition.
3. If equipped, remove front shock tower cap (1) from top of shock assembly (4).
4. Remove three nuts (2) fastening shock assembly (4) to shock tower (3).
