Magnum SRT-8 V8-6.1L VIN 3 (2006)
14. Remove upper control arm mounting (flag) bolts (1)
15. Remove upper control arm (2) from bracket (3) in shock tower (4).
INSTALLATION
NOTE: Although AWD and RWD upper control arms are similar in appearance, they are not interchangeable.
1. Slide upper control arm (2) into bracket (3) located in shock tower (4).
2. Install upper control arm mounting (flag) bolts (1) through bracket, arm and tower. Position flags on bolt heads outward, toward wheel opening.
3. Export Only - If servicing right upper control arm, connect headlamp leveling sensor (2) link at upper control arm (1).
