dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Suspension|Page 5447 > < Front Suspension|Page 5445
Page 20
background image

WARNING:  Before opening fuel system, review all Warnings and Cautions.

3. If servicing left side, remove fuel filler tube.
4. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension

removal/installation.

5. Perform following if vehicle is equipped with dual exhaust or are servicing right side on vehicle with single exhaust.

a. Position under-hoist utility jack or stand several inches below exhaust at muffler.
b. Disconnect exhaust isolators at muffler and resonators hangers.
c. Lower exhaust down to rest upon top of jack or stand placed below muffler.

6. Position under-hoist utility jack or transmission jack (3) under center of rear axle differential (1). Raise jack head to contact differential and secure

in place. When securing crossmember to jack, be sure not to secure stabilizer bar.

Front Suspension|Page 5447 > < Front Suspension|Page 5445