Magnum SRT-8 V8-6.1L VIN 3 (2006)
1. Install control arms.
2. To aid installation, raise engine cradle to marked location.
3. Install four engine cradle bolts (4) and raise cradle. Tighten cradle bolts to 185 N.m (136 ft.lbs.).
4. Install stabilizer with isolators and retainers onto cradle.
5. On each side of vehicle, install bolts (2) fastening stabilizer bar isolator retainer (3) in place. Tighten bolts to 60 N.m (44 ft.lbs.).
6. Tighten engine mount nuts to 60 N.m (44 ft.lbs.).
7. Tighten left and right ball joint nut (4) to 122 N.m (90 ft.lbs.) attaching lower control arm ball joint stud to knuckle (3).
