Magnum SRT-8 V8-6.1L VIN 3 (2006)
8. Disconnect right rear parking brake cable (4) at connector (3) to front parking brake cable (4).
9. Disconnect left rear parking brake cable (1) at equalizer (2). Leave equalizer on front cable.
10. Remove screw (2) fastening front parking brake cable (1) routing bracket to rear crossmember front flange (3). Remove J-nut from crossmember.
11. If equipped with standard or premium disc brakes, on each rear disc brake:
a. While holding guide pins from turning, remove disc brake caliper guide pin bolts (2).
b. Remove brake caliper (1) from brake adapter (3) and pads.
c. Guide brake caliper up through suspension, following brake hose path. Support caliper above rear suspension using with bungee cord or wire
to keep caliper from overextending brake hose when crossmember is lowered.
