Magnum SRT-8 V8-6.1L VIN 3 (2006)
63. Raise vehicle and remove jack stands (3).
64. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 N.m (110 ft.lbs.).
65. Lower vehicle.
66. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
67. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
68. Perform wheel alignment, paying special attention to thrust angle. If rear crossmember needs to be shifted to align thrust angle, try to avoid
