Magnum SRT-8 V8-6.1L VIN 3 (2006)
28. Remove coil springs (2) with isolators (1 and 5) from spring links (4).
29. As an installation reference, carefully mark location of bushing requiring removal on crossmember (around bushing can flange) using a marker or
crayon. Do not use a scratch awl to mark location.
30. Slide Support (2), Special Tool 9031-11, into end of crossmember (3) surrounding bushing bore as shown.
31. Snug set-screws (1) securing Support (2) to crossmember.
