Magnum SRT-8 V8-6.1L VIN 3 (2006)
11. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
12. Lower vehicle.
NOTE: When tightening lower shock clevis mounting bolt, do not attempt rotating bolt. Bolt shaft is serrated. Turn nut only.
13. Tighten lower shock clevis bracket bolt nut (3) to 174 Nm (128 ft. lbs.) torque.
RWD
1. Place shock assembly into front suspension using reverse direction in which it was removed.
CAUTION: It is important to tighten nut as described in following step to avoid damaging ball stud joint.
