Magnum SRT-8 V8-6.1L VIN 3 (2006)
Wheel Bearing: Description and Operation
Rear Suspension
HUB / BEARING
DESCRIPTION
The rear wheel bearing and wheel hub of this vehicle are a one piece sealed unit or hub and bearing unit type assembly. The hub and bearing (1) is
mounted to the center of the knuckle using 4 bolts. It has five wheel mounting studs (2) on the hub flange.
The center of the hub and bearing is splined to match the axle half shaft.
The wheel mounting studs used to mount the tire and wheel to the vehicle are the only replaceable components of the hub and bearing. Otherwise, the
hub and bearing is serviced only as a complete assembly
