Magnum SRT-8 V8-6.1L VIN 3 (2006)
1. Slide hub and bearing onto knuckle spindle.
2. Install hub nut (1) on end of spindle. Tighten hub nut to 250 Nm (184 ft. lbs.) torque.
3. Install brake rotor, then disc brake caliper and adapter assembly.
NOTE: Install a new dust cap to preserve seal integrity.
4. Install NEW dust cap (2) on hub and bearing.
5. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
6. Lower vehicle.
