Magnum SRT-8 V8-6.1L VIN 3 (2006)
6. Place Gauge (1) over parking brake shoes at widest point.
7. Using adjuster star wheel (2), adjust parking brake shoes until linings on both park brake shoes just touch jaws on gauge. This will give a good
preliminary adjustment of parking brake shoes, before a final adjustment is made at end of this procedure.
8. Install brake rotor and components removed to access it.
9. Install wheel and tire assembly. Tighten wheel mounting (lug) nuts in proper sequence to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.))
torque.
10. Adjust parking brake shoes.
11. Lower vehicle.
12. Road test vehicle to ensure proper operation of the brakes.
