Magnum SRT-8 V8-6.1L VIN 3 (2006)
2. Install the park lock cable (4) to the ignition cylinder (3). Secure the cable to instrument panel at retainer.
3. Install any instrument panel trim that was removed to access the park lock cable.
4. Route park lock cable towards shift mechanism.
5. Connect the park lock cable core to shift mechanism cam (3), and then secure cable housing to shift mechanism.
6. Adjust the park lock cable.
7. If necessary, install the shield, covering the gearshift and park lock cables, to the floorpan and install the bolts to hold the shield to the floorpan.
8. Install the floor console assembly.
