dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3625 > < Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3623

Magnum SRT-8 V8-6.1L VIN 3 (2006)

Page 6
background image

Valve Housing Components

18. Remove all valves and springs from the valve housing (2). Check all valves for ease of movement and shavings.

19. Remove the pressure supply valve (1) from the valve body.

ASSEMBLY

NOTE: Pay great attention to cleanliness for all work on the shift plate. Fluffy cloths must not be used. Leather cloths are particularly good. After
dismantling, all parts must be washed and blown out with compressed-air, noting that parts may be blown away.

1. Install the pressure supply valve (1) into the valve body

Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3625 > < Fluid Pressure Sensor/Switch, A/T|Description and Operation|Page 3623