Magnum SRT-8 V8-6.1L VIN 3 (2006)
7. Disengage all wiring connectors (2) from the shifter assembly (1).
8. Remove all nuts (2) holding the shifter assembly (1) to the floor pan.
9. Remove the shifter assembly (1) from the vehicle.
INSTALLATION
1. If a new shifter assembly is being installed, unscrew the original shift knob from the shift lever. Screw the knob onto the new shifter assemblies
lever no more than 14 turns.
2. Install shifter assembly (1) onto the shifter assembly studs on the floor pan.
3. Install the nuts (2) to hold the shifter assembly (1) onto the floor pan. Tighten nuts to 7 Nm (65 inch lbs.).
