Magnum SRT-8 V8-6.1L VIN 3 (2006)
Drive/Propeller Shaft: Service and Repair
REMOVAL-REAR
CAUTION: Propeller shaft removal is a two-man operation. Never allow propeller shaft to hang from the center bearing, or while only connected to
the transmission or rear axle flanges. A helper is required. If a propeller shaft section is hung unsupported, damage may occur to the shaft, coupler,
and/or center bearing from over-angulation. This may result in driveline vibrations and/or component failure.
1. With vehicle in neutral, position on hoist.
2. Apply alignment index marks (3) on the transmission and axle flanges (2) and rubber couplers (1).
3. Remove crossmember (1).