Magnum SRT-8 V8-6.1L VIN 3 (2006)
16. Remove axle seals (2) using suitable screwdriver.
INSTALLATION
NOTE: Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
CAUTION: Unequal-length halfshafts are used. The left halfshaft is shorter than the right, and it is necessary to identify and tag halfshafts upon
removal to ensure proper installation.
CAUTION: Never grasp halfshaft assembly by the inner or outer boots. Doing so may cause the boot to pucker or crease, reducing the service life of
the boot and joint. Avoid over angulating or stroking the C/V joints when handling the halfshaft.
1. Install new axle seal(s) (1) using Tool 9223 (2).
