Magnum SRT-8 V8-6.1L VIN 3 (2006)
12. Check and adjust brake fluid level in reservoir (1) as necessary.
13. Road test vehicle and make several stops to wear off any foreign material on brakes and to seat brake pads.
HUB AND BEARING - SRT8
NOTE: Before installing hub and bearing on end of axle half shaft, ensure isolation washer (1) is present on end of half shaft. Inspect washer making
sure it is not worn or damaged. Washer can be installed in either direction on shaft.
NOTE: To help upon installation, make sure that hub and bearing mounting bolts (1) extend through knuckle (3) and parking brake adapter (2) to
