dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Module|Page 3645 > < Cruise Control Module|Locations|Page 3642
Page 1
background image

Cruise Control Module: Testing and Inspection
Control Module

1986-87 MINI-VANS/WAGONS

    The electronic module is rarely the cause of erratic system performance and should not be replaced if speed can be maintained within 5 mph
of the selected speed on a level road.

1. Connect negative lead of a voltmeter to chassis ground and positive lead to pin No. 7 of module electrical connector.
2. While driving vehicle at 40-50 mph, turn speed control switch to On position and ensure voltmeter indicates 12 volts.
3. Press and release speed control Set button and ensure voltmeter indicates a fluctuating 5-9 volts. If system is not controlling throttle to maintain

"set" speed, replace electronic module.

Control Module|Page 3645 > < Cruise Control Module|Locations|Page 3642