Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
Front Door Panel: Service and Repair
REMOVAL
Front Door Trim Panel
1.
Lower the door glass until it is 3 inches (75 mm) from the full-down position.
2.
Remove the remote handle bezel with the door unlocked by prying the front of the bezel out and rearward.
3.
Remove the screw in the armrest pocket.
4.
Pry out the door lock switch bezel.
5.
Remove the window crank (if equipped with manual windows).
6.
Remove the door trim panel, (retained with frog legged clips) and push the power lock switch through the door trim panel.
7.
Disconnect the courtesy light pigtail.
8.
Remove plastic and foam composite door liner where access is required.
INSTALLATION
1.
Apply adhesive to the door liner and fasten it to the inner door panel.
2.
Connect the courtesy light pigtail.
3.
Push the power lock switch through the door trim panel and install the door trim panel.
4.
Push the power lock switch into place.
5.
Attach the window crank (if equipped with manual windows).
6.
Install the screw through the armrest pocket.
7.
Install the remote handle bezel with the door unlocked by pushing the bezel in and forward.
