Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
FIGURE 4 - Gasket
3.
Obtain new gasket PN MD060521 and, using a sharp knife, rework by cutting out portion of gasket within dotted lines indicated in Figure 4.
NOTE:
DISREGARD REWORK INSTRUCTIONS IN STEP 3 IF NEW GASKET ALREADY HAS HOLE CUT OUT.
THIS CHANGE WAS INCORPORATED IN ENGINES IN PRODUCTION, APPROXIMATELY 84-04-01, (ENGINE BUILD
DATE, CODE 7-282), AND WILL BE IN SERVICE REPLACEMENT GASKETS AT A LATER DATE.
4.
Reinstall pump using reworked mounting gasket.
5.
Install new Timing Chain Guide PN MD021231.
6.
Install timing chain, silent shaft chain, and guides according to instructions contained in the applicable service manual.
NOTE:
ENSURE THAT LOCKWASHER PN MF450404 IS IN PLACE AS INDICATED IN FIGURE 3.
7.
Install chain case cover.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
09-02-85-90
Camshaft Timing Chain Guide Breakage
3.9
09-02-85-91
Optional Equipment Power Steering
0.1
09-02-85-92
Optional Equipment Air Conditioning
0.2
FAILURE CODE:
68 - Noisy
